Technical Resource Guide_WEB_BEL25-D-516650 - Page 80 of 84

80 | belgard ® product installation guide | belgard.com | 877-235-4273 SKID-STEER LOADER Slide forks underneath the first step unit and lift off pallet. Set the step unit onto its desired location, using a spacer to ease in fork removal. A helpful tip to protect the step unit is to wrap the fork of the skid-steer with corrugated plastic packaging from the pallet or other protective materials. Secure to the forks. CLAMP Using a materials clamp, center the clamp on the step unit. Attach clamp to skid-steer or mini-excavator and slowly lift the step unit off of the pallet and move it into place. Be sure to have a second person to help guide the unit into place as the machine sets the step unit down. STRAPS When using a heavy-duty strap(s), start by wrapping the strap(s) around the center if using one, or close to step unit ends if two straps are being used. Cinch the strap(s) tight and attach the looped ends of the strap(s) to a skid-steer or mini-excavator. Slowly lift the step unit from the pallet and move it into place. Be sure to have a second person to help guide the unit into place as the machine sets the step unit down. Using a spacer will help to ease in the strap removal. CART When using a cart, place provided corrugated plastic from pallet or other protective material onto the cart to help protect the step unit. With help from a second person, slowly slide the step unit from the pallet onto the cart. Maneuver the unit carefully into place. Videos can be found on our YouTube channel: www.youtube.com/anchorblockmn